2013-2016 For A3/S3 8V Body Kits With Honeycomb Grille Front Lip Splitter | RS3 Bumper

• Facelift Route: RS3 nose transplant for 8V-chassis A3 and S3 sedans and hatchbacks
• Plastic & Mesh Specs: Thermoformed Polypropylene bumper shell paired with UV-stabilized Gloss Black ABS grille inserts
• Delivery Scope: One-piece bumper cover, integrated front lip splitter, and main hexagonal mesh grille
• Target Platform: 2013–2016 Audi A3 / S3 (8V pre-facelift, Sedan and Sportback)
• Sensor Layout: Factory PDC grommet positions molded into the lower valance with alignment index marks

Product Overview

Erase the reserved stock face of your 8V A3 or S3 and replace it with the track-bred stare of the RS3. This front bumper kit deletes the conventional fog-light housings entirely and reconfigures the lower fascia around two enormous side ducts, each framed by a razor-thin vertical blade that visually stretches the car wider. The integrated front lip splitter extends forward just enough to catch the light without scraping on speed bumps, and the honeycomb grille openings are sized to feed the intercooler and brake ducts with zero obstruction.

Key Features & Build Quality

• Energy-Absorbing PP Grade: Formulated with a higher elastomer content so the bumper compresses under impact instead of shattering like fiberglass.
• Gloss-Black Mesh Module: The ABS honeycomb arrives pre-coated in a deep wet-look black that holds its gloss through years of brush-car-wash cycles.
• Lip-Splitter Integration: The lower lip is not a tacked-on afterthought — it blends into the bumper's bottom edge through a continuous molded parting line.
• Clip-Based Assembly: Side grilles and center mesh lock into the bumper shell using OEM-style spring tabs, no screws or adhesive.

Vehicle Fitment & Compatibility

• ✅ Engineered for 2013, 2014, 2015, and 2016 Audi A3 and S3 (8V chassis, both Sedan and Sportback body styles).
• Will not fit 2017+ 8V.5 facelift cars — headlight shape and hood leading edge differ.

Body Shop & Paint Prep Notes

• Remove the gloss-black grille inserts before painting the main shell to avoid overspray on the mesh.
• Block-sand the primer surface with 600 then 800 grit on a soft pad to level any minor molding artifacts before basecoat.

💬 If you are unsure about product compatibility, please send your Vehicle Identification Number (VIN) or front and rear photos of your vehicle to us for verification.