2017-2019 For A5/S5 B9 Front Bumper Facelift RS5 Style Body Kits With ACC Honeycomb Grille Front Lip

• Face-Lift Concept: RS5 coupe front fascia adapted for B9-chassis A5 and S5 two-door and four-door bodies
• Plastic Formulation: OEM-grade Polypropylene resin with <1% mold-shrinkage tolerance for repeatable panel gaps
• Contents Checklist: Bumper cover, hexagonal center grille with chrome-ring delete, ACC-compatible lower mesh, front lip
• Fitment Years: 2017–2019 Audi A5 / S5 (B9, Coupe and Sportback)
• PDC Retention: Factory-identical sensor clip geometry — your original harness plugs straight into the new bumper pockets

Product Overview

The B9 A5 and S5 wear one of Audi's cleanest modern designs, but the stock bumper is deliberately restrained to leave room for the RS5 above it. This conversion fills that room. The bumper eliminates the fog-light cutouts entirely and replaces them with massive, unbroken air intakes that funnel directly toward the auxiliary radiators. The center grille is a full-frame hexagon with no chrome surround, and the lower lip extends forward in a shallow blade that catches pavement reflections. The result is a front end that looks purposeful without looking aftermarket.

Key Features & Build Quality

• Sub-1% Shrinkage Control: The mold tooling is thermally regulated during the injection cycle so the finished bumper matches the CAD model within hairline tolerances — no post-mold warping.
• Fog-Delete Intake Scoops: The side apertures are full-depth, unobstructed channels that route cooling air to the brake and intercooler zones, exactly like the RS5 setup.
• Chrome-Ring Elimination: The grille frame is body-colored or paint-matched — no chrome trim ring, staying true to the RS5's blacked-out design language.
• Lip-Blade Geometry: The front splitter follows the B9 RS5's blade-style lower aero profile, adding a sharper horizontal cut to the bumper's bottom edge.

Vehicle Fitment & Compatibility

• ✅ Engineered for 2017, 2018, and 2019 Audi A5 and S5 (B9 chassis, Coupe and Sportback).
• ❌ Will not fit 2020+ B9.5 facelift models — the radiator shroud and headlight lower mounting points were updated.

Body Shop & Paint Prep Notes

• Ensure the intake scoops are thoroughly scuffed with 600-grit inside the deep recesses to prevent basecoat peeling in the corners.
• The body-matched grille frame should be painted while attached to the bumper shell to guarantee an identical color and clearcoat texture match.

💬 If you are unsure about product compatibility, please send your Vehicle Identification Number (VIN) or front and rear photos of your vehicle to us for verification.